Click image to view full size image
Description:
CNC panel saw1. max. cut thickness 80mm
2. CNC control, labor saving
3. firm rigidity, made of good steel
4. imported part
CNC Panel SawMachine MJK6230D
National New &High-Tech Product
Torch programproduct
Description:
1. The cncpanel saw MJK6230D is suitable for large amount precisecutting with max.cutting height 80mm.
2. It can be usedfor cutting wood panel into several pieces at supposed width andthickness automatically and continuously. Operator just needs toinput the cutting size value on the screen, then the machinebegin to work.
Parameter:
| max. cuttingh length | 3050mm |
| max. extent height of mainsaw | 80mm |
| main saw diameter | 350mm |
| main spindlediameter | 30mm |
| main spindle speed | 5000rpm |
| main saw motor power | 13kw, 2P |
| scoring saw diameter | 170mm |
| scoring spindlediameter | 30mm |
| scoring spindlespeed | 6500rpm |
| scoring spindle motorpower | 1.5kw, 2P |
| saw carriage motorpower | 3kw |
| feed motor power | 1kw |
| saw carriage movingspeed | 0-60m/min |
| material feed speed | 0-30m/min |
| power supply | AC380V |
| air pressure | 0.6-0.8mpa |
| overall dimensions(L*W*H) | 5630*5780*1700mm |
| net weight | about 4500kg |
Devices:
1. Chain-driving prevents cuttingfrom slipping away under heavy load.
2. Double-side push deviceensures preciseness of cutting for narrow board.
3. imported control and drivingdevice are precise and durable
4. Floating clamp-hand structurecan prevents pieces from been damaged.
Working Process:
This machine is fullyautomatic: input the data of workpiece thickness, length,width and required width, then the machine will take the workpieceinto the machine by clamp hand, thus it will calculate how manypieces to cut and then start operation. After finish cutting, itwill push the ready ones out, which enable user to carry them out.There is air sprayed out from the holes on worktable surface, thususer can easily carry the heavy board without burden.
Video is available for thismachine!
High-quality assurance:
3.Main electric parts are "Schneider" brand.
4.Main spare parts are made by "pentahedron machining center",which is imported from Japan.
woodworking CNC panel saw machine MJK6230D
